manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 50 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 50

 

 

40 

Necessary items for the Dome of Outdoor Type:   

•

 

GV-IP Speed Dome (Indoor Type)     

•

 

Data Cable (supplied)   

•

 

Ethernet Cable   

•

 

Standard/Mini Pendent Mount (optional)   

•

 

Pole Thin Box Mount (optional)   

•

 

Indoor Mount Kit (supplied) 

•

 

Waterproof Rubber (supplied with Indoor Mount Kit) 

•

 

Stainless Steel Straps (supplied with Pole Thin Box Mount) for fixing the Pole Thin Box 
Mount to the wall   

 
Follow the steps:   

1.  Fasten the Pole Thin Box Mount on a pole with the supplied stainless straps.   

2.  Run the Data and Ethernet cables through the hole on the Pole Thin Box Mount. 

3.  Run the cables through the Standard/Mini Pendent Mount and fasten the Standard/Mini 

Pendent Mount onto the Pole Thin Box Mount with the supplied screws and washers.   

4.  Block the cable entry hole with the supplied sponge to prevent insects from entering the 

Pendent Mount. See Figure 2-24. 

5.  Attach the Waterproof Rubber to the Standard/Mini Pendent Mount. 

6.  Run the cables through the Indoor/Outdoor Mount Kit and join the Indoor/Outdoor Mount 

Kit to the Standard/Mini Pendent Mount with the supplied screws and washers. Then 
adjust the Waterproof Rubber to the joint. 

7.  Connect the cables to the GV-IP Speed Dome. 

8.  Join the Dome to the Indoor/Outdoor Mount Kit with the supplied M5 screw and washers. 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments