manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 44 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 44

 

 

34 

Necessary items for the Dome of Outdoor Type: 

•

 

GV-IP Speed Dome (Outdoor Type) 

•

 

Data Cable (supplied)   

•

 

Ethernet Cable 

•

 

Standard/Mini Pendent Mount (optional)   

•

 

Corner Plate Mount (optional) 

•

 

Waterproof Rubber (supplied) 

•

 

M5 Standard/Security Screw (supplied) 

•

 

Screws and screw anchors for fixing the Corner Plate Mount on the wall (not supplied)   

 

Follow the steps:   

1.  Make a cable entry hole on the wall to recess the cables. 

2.  Fix the Corner Plate Mount on the corner of the wall with proper screws and screw 

anchors. Then run the Data and Ethernet cables through the hole on the Corner Plate 
Mount. 

3.  Run the cables through the Standard/Mini Pendent Mount and fasten the Standard/Mini 

Pendent Mount onto the Corner Plate Mount with the supplied screws and washers.   

4.  Block the cable entry hole with the supplied sponge to avoid insects entering the Pendent 

Mount. See Figure 2-24. 

5.  Attach the Waterproof Rubber to the Standard/Mini Pendent Mount. 

6.  Run the cables through the Indoor/Outdoor Mount Kit, and join the Indoor/Outdoor Mount 

Kit to the Standard/Mini Pendent Mount with the supplied screws and washers. Then 
adjust the Waterproof Rubber to the joint. 

7.  Connect the cables to the GV-IP Speed Dome. 

8.  Join the Dome to the Indoor/Outdoor Mount Kit with the supplied M5 screw and washers. 

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments