manualshive.com logo in svg

GeoVision GV-IP Speed, User Manual, Page: 134 / 164

Share
Download
GeoVision GV-IP Speed User Manual Download Page 134

 

 

 

124 

To define how to display the received video on motion detection and input trigger from the 
GV-IP Speed Dome, click the 

Preference Setting 

button and select 

System Configure

. This 

dialog box appears. 

 

Figure 8-3 

„

 

Manual close channel: 

Closes the triggered camera view manually. 

„

 

Close the camera view when motion stopped: 

Closes the triggered camera 

view automatically when motion stops. 

„

 

Post Motion: 

Specify the duration of the camera view remaining on the 

monitoring window after motion stops.   

„

 

Camera send by I/O trigger will monitor: 

Specify the duration of the camera 

view remaining on the monitoring window when an I/O device is triggered. 

 

To keep the camera view remaining on the monitoring window even after the 
alarm is finished, click the right-arrow button, and uncheck 

Latch Trigger

. Then 

the camera view will keep remaining on the monitoring window for the specified 
time. For example, the alarm is triggered for 5 minutes and you set 10 minutes, 
which means the total display time will be 15 minutes. 

 

For further information on how to mange the received video from the GV-IP Speed Dome, see 

GV-CMS Series User’s manual.

 

Summary of Contents for GV-IP Speed





































































































































































Reviews:

No comments