Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
35
46
01
23/07/13
23/07/13
4.8. SAFETY FEATURES
4.8.1. PROTECTIVE EQUIPMENT ON MACHINE
Since the electrical equipment malfunctions or disturbances may lead to a dangerous condition or cause damage to the
machine, appropriate measures to reduce the likelihood of such failures or disturbances were taken.
Below you find the degree of adoption of any measure, the level of application depends on the risk level related to the
particular application.
The guards and safety devices of the machine must not be removed except for the need to work on
the part of the maintenance technician.
If they need to be removed
measures to highlight and reduce to a minimum the possible
danger that comes with it shall be taken immediately.
As soon as the reasons that necessitated their temporary removal exist no longer, the protective or
safety device must be put into place again.
FIXED GUARDS
The movement transmission organs of the machine are completely segregated by means of appropriate fixed guards
locked with screws. For the removal of a fixed guard the use of a tool is required.
Concerning
fixed guards is also states
that:
1. the dimensions of the fixed guards are such as to leave no openings in the protected danger work zone
when they are set in place;
2. guards not fixed permanently welded to the machine are secured with screws that require the use of
special keys (Allen keys) and can be removed, with the appropriate key, only those who are responsible for
maintenance;
3. access to areas protected by a fixed guard is allowed only to the maintenance technician. Not under any
circumstances the operator must try to open a fixed guard;
4. it is not possible to reassemble a guard in the wrong position so as to leave dangerous openings in the
fairing;
are not fastened in their place with the appropriate special screws, they can not remain closed and backed into
that place in the absence of fasteners.
When measuring and selecting safety devices and guards,
the accessibility of people aged 14 years or more
was taken
into account.
Access to areas protected by a guard
is allowed to both the operator and the maintenance
technician. Under no circumstances, the operator must tryto willfully evade a guard.
Access to areas protected by a fixed guard
is allowed only to the maintenance technician. Under
no circumstances, the operator musttry to willfully evade a guard.
Prior to putting in service,
all guards and safety devices must be properly installed, adjusted /
tuned and made operational, scrupulously and carefully following the instructions in the manuals for
installation use and maintenance of these safety devices (all delivered together with equipment) and
the user instructionmanual.
The manufacturer strictly forbidstampering with
some of the safety devices
,
even if partially or
only temporarily, as they were installed on purpose for the physical safety of both operators and staff
present.
Violation of this precept causes risk and is inconsistent with existing legal provisions on work safety.
