Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
32
46
01
23/07/13
23/07/13
RESIDUAL RISK DUE TO ELECTRIC SHOCK
There isis a residual risk for the maintenance operator working on the electrical equipment, in
the intermediate circuitsin DC of the drives when the fixed guards which guarantee a degree of
protection IP 2X are open,
due to the presence of a voltage higher than 60V for a period
greater than 5 seconds after the power failure, opening the general sectioning device
on the power supply.
Therefore, the maintenance operators must operate with caution, observe the instructions on
the labels put near the mentioned components and
wait 5 minutes
after power failure,
opening the general sectioning device on the power supply before
making changes in
DC intermediate circuits DC
of the activations.
These people must also follow the specific safety standards of maintenance operators.
IPM:
Eye
Protection
Protective
gloves
Safety
shoes
Body
Protection
Face
protection
RESIDUAL RISK DUE TO LIFTING OPERATIONS AND TO INTERVENTIONS THAT
REQUIRE MANUAL OPERATIONS
The lifting and transportation of the machine or its parts, the set-up or handling, even if performed in
accordance with the guidelines of this manual, are manual operations which involve a residual risk
mainly
due
to impact, crushing, dragging, sliding or abrasion
.
These operations require a considerable degree of attention from professionals, the operations manager
must adequately inform the staff of these residual risks.
There is also a residual risk for the operator or manintenance operator of impact, abrasion, cut, puncture and
sliding during
the setup, themaintenance, cleaning and other manual operations that may involve the
fallingof parts or components from above,
also due to the necessity of performing a manual intervention
on the machine.
Therefore, both the operator and maintenance operator as besides being adequately informed and trained,
whenever performing manual tasks,
in addition to respecting the normal user modalities, must use
protection devices for the head (if there is any danger of elements falling down ) the hands, feet and
clothing suitable for the workplace such as: the safety helmet, safety gloves, slip resistant shoes,
suitable for the particular nature of the risk, with an iron tip.
IPM:
Protective
gloves
Safety shoes
Body
Protection
Safety
helmets
