Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
10
46
01
23/07/13
23/07/13
•
The costs for the replacement of lubricants, transportation costs, meals and lodging based on
current rates of GM Distribution S.r.l. for work performed at the users
’ premises, any customs fees for
machines shipped abroad.
•
Taxes (VAT) and anything else not written in the supply contract are in any case charged to
purchaser.
•
The replacement or repair of materials under warranty do not extend in any case the terms of the
warranty.
The purchaser may enforce his warranty rights only if he has fulfilled the requirements for application of the
warranty, listed in the supply contract. If it appears that the parties choose to submit the disputes arising from
the supply contract to arbitration or in any other case in which the pronouncement is required by an ordinary
Court of Law, only the Court of Pesaro
– Italy will be of territorial jurisdiction.
1.8.
NOT COVERED
Upon delivery you must ensure that the machine was not damaged during transport. All claims must be
submitted within 8 days after delivery of the product. The purchaser may enforce his warranty rights only
when he has fulfilled the conditions regarding the application of warranty, listed in the supply contract.
In addition to the cases described in the supply contract, the warrantyis invalidated:
•whenever you verify an error attributable to the operator, in not in compliance with or contrary to the
instructions in this user guide.
•whenever the damage to the machine is caused by insufficient maintenance.
•whenever the machine is used for purposes other than those specified in this user guide.
•whenever the damage to the machine is caused by the environmental conditions in which it operates,
or by phenomena not depending from its normal functioning, such as irregularities in the voltage or
frequency of the power supply of the electrical distribution in the plant.
•whenever, following repairs performed by the user without the consent of the GM Distribution S.r.l. or
because of installation of not original spare parts, the machine has undergone changes and the
damage is caused by these changes.
•wheneverthe instructions described in this manual are not observed.
1.9. HOW TO CONSULT THE MANUAL
The Manual is subdivided into independent chapters, each aimed at specific personnel (operator,
maintenance electrician/installer, maintenance mechanic/installer), for whom the necessary skills for safe
machine use are defined.
The sequence of chapters complies with the temporal logic
of the machine’s lifecycle.
To facilitate the immediateunderstanding of the text, a series of terms, abbreviations and pictograms are used
whose meaning has been specified in the previous and following paragraphs:
a.
Sect. = Section
b.
Ch. = chapter
c.
Par. = paragraph
d.
Pag. = page
e.
Fig. = figure
f.
Tab. = table
g.
UIMM = User Instruction and Maintenance Manual
