Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
4
46
01
23/07/13
23/07/13
1.2.3. UPDATES, INTEGRATIONS AND REPLACEMENT
This Manual must be kept in the immediate proximity of the machine, inside a special container
and most importantly protected from fluids, humidity, excessive heat and any other factor or
condition which could affect the legibility of the document. Consult the Manual making sure
that the contents are non
PRESERVATION
completely or partiallly damaged.
When consulting the manual make sure not to deface the pages;
Do not remove pages from the manual;
Do not write notes in the Manual. A blank space for notes is provided in the specially
designated tables.
In case of damage or loss of this Manual, a copy can be requested to the Manufacterer GM
Distribution S.r.l.
This Manual reflects the technical state of the machine at the time of manufacturing. The
Manufacterer preserves the right to update its production and therefore issue other editions of
the manual, without any obligation to update previous productions or manuals, except for
specific cases related to health or safety of individuals.
The user can however ask GM Distribution S.r.l.for any amendments or updates, if required,
which will subsequently be considered an integral part of the manual;
If the user should want to receive further information he is invited to contact the Manufacturer
GM Distribution S.r.l. directly.
If the machine is sold, the user is kindly asked to inform GM Distribution S.r.l. the details of the
new owner in order to facilitate the handing over of any integrations of the Manual that, as
already stated before, needs to stay with the machinealso in case of a transfer to new owner.
GM Distribution reserves the right to modify the design and make improvements onthe machine
without notifying the Customer and without updating the manual already given to the user.
Moreover, in case of modifications made, in agreement with the manufacturer,on the machine
already installed on the customer
’s premises that lead to the need to amend of one or more chapters of
the Manual, the Manufacturer must provide the new customer/holder of the Instruction Manual the
chapters affected by the changes,plus the new overall revision of the Manual;
It is theresponsibility of the user, in accordance with the indications supplied with the updated
documentation, to replace thesuperseded chapters with the new ones and the frontispiece and table of
contents with the new pages indicating of the new revised level in all the copies held;
The manufacturer assumes responsiblilityfor the descriptions in Italian language, any translations
may not be fully exhaustively checked, so if an inconsistencyor discrepancy is detected, the Italian
version will always prevail; If necessary call our sales office, which will make the amendments it
considers necessary.
1.2.4.
GENERAL INFORMATION
Use the machine properly.
Observe and apply safety requirements outlined in the manual.
Pay particular attention to the content of
chapter n. 4
in which the residual risks present
on the machine are highlighted and the presescroptionsthat theoperators need to follow.
GM Distribution S.r.l.considers herself responsible for the machine in its original
configuration. Any intervention that changes the structure of the machine and its duty cycle
must be approved and registered in the office of the GM Technical Distribution S.r.l.
GM Distribution S.r.l. is not responsible for damage caused by improper or incorrect use
of the machine and documentation.
GM Distribution S.r.l. is not responsible for damages caused by violation of compulsory
regulations, negligence, inexperience, recklessness and failure to comply with regulatory
standards by the employer, machine operator or maintenance technician.
