Manualedelleistruzioni per l’uso
Document Code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
14
31
00
23/07/13
23/07/13
6.5. SWITCH-ON - CONTROLS - CHECKS - ADJUSTMENTS - START-UP
All the functions/operations relating to the operating modes
must always respect
the safety measures and the prescriptions to protect
against residual risks
(see
chapter 4).
The machine must always be used exclusively for the product workings indicated in
paragraph 2.2.
During the working cycle, it is essential to respect the
safety measures and
prescriptions to protect against residual risks
(see chapter 4).
For details of the functions of each command and information device, refer to the
“Layout” and the description of the command and signaling devices given in the
electrical diagram enclosed with this manual
.
It is also emphasized that the user's personnel should
attend a training course
if
necessary. Contact the manufacturer to define the contents, methods and times of the
proposed course
All adjustment and recording interventions must be carried out by the operator of the
machine (refer to paragraph 4.2.2)to guarantee a correct and safe use of the
machine, these include all the periodical checks/ verifications, periodical adjustment
and recording interventions (electrical components and electrometricalor magnetic
position registration) before every start-up and in any case periodically. You can find
these interventions listed in:
Chapter
7 “Interventions to be carried out by Operators”
In those parts of the Manual dedicated to starting up the machine.
Only after the designated operator has made sure that all safety regulations in this
Manual are observed, he can proceed to starting up the machine for its normal
productive use.
LEANSTEER FRAME/HANDLEBAR ASSEMBLY
Ensure the following:
The Handlebar is attached to the LeanSteer Frame.
The LeanSteer Frame is attached to the Powerbase.
The Handlebar is adjusted to the appropriate height.
The LeanSteer Frame pivots at the base to control left/right direction of the machine.
If you lean to the left while holding the Handlebar, the LeanSteer Frame pivots and the machine turns left. If you lean to the
right while holding the handlebar, the LeanSteer Frame pivots and the machine turns right.
Always lean left or right in coordination with the LeanSteer Frame.
TIRE/WHEEL ASSEMBLY AND FENDERS
Ensure that Tires are inflated to the proper tire inflation pressure as specified in chapter 2 on technical specifications.
Tires and Wheels are shipped as an assembly. Do not remove the Tire from the Wheel.
The Fenders on the machine are designed to protect the rider from debris and to safeguard the rider while leaning into
turns. Ensure that they are in perfect condition (no cracks or deformations).
