Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
37
46
01
23/07/13
23/07/13
BALANCE SENSOR ASSEMBLY
The figure shows the location of the Balance
Sensor Assembly.
The Balance Sensor Assembly contains five
angular rate sensors (solid state gyroscopes) and
two tilt sensors.
The Balance Sensor Assembly sends information
about the machine’s orientation to the Controller
Boards.
All sensors are constantly monitored by the
machine to ensure each is operating correctly.
If one of these sensors fails, the machine will
perform a
Safety Shutdown
.
BATTERIES
The figure shows the location of the Batteries.
The two Batteries are sealed units (when properly
installed) that require no maintenance other than
proper charging and storage.
The Batteries are interchangeable and can each be
installed in either the front or rear of the Powerbase.
For the machine to operate, both Batteries must be
installed, and both must be Li-ion Batteries.
The battery, which governs the security control that
activates the stabilizing parking stand, have Lead-
Gel technology.
If one Battery fails or is depleted beyond its safe
limit, the machine will perform a Safety
Shutdown
.
