1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
page.7
2. DIMENSIONS
page.7
3. MAXIMUM USE CURVE
page.7
4. ELECTRONIC DEVICES (standard system)
page.7
5. INSTALLING THE AUTOMATED SYSTEM
page.8
5.1. PRELIMINARY CHECKS
page.8
5.2. MASONRY FOR FOUNDATION PLATE
page.8
5.3. MECHANICAL INSTALLATION
page.8
5.4. INSTALLING THE RACK
page.8
6. START-UP
page.9
6.1. CONNECTION OF CONTROL BOARD
page.9
6.2. POSITIONING THE TRAVEL-LIMIT ELEMENTS
page.9
7. AUTOMATED SYSTEM TEST
page.10
8. MANUAL OPERATION
page.10
9. RESTORING NORMAL OPERATION MODE
page.10
10. SPECIAL APPLICATIONS
page.10
11. MAINTENANCE
page.10
12. REPAIRS
page.10
13. ACCESSORIES
page.10
INDEX
DECLARATION OF INCORPORATION FOR PARTLY
COMPLETED MACHINERY
(2006/42/EC ANNEX II P.1, B)
Manufacturer and person authorised to draft the applicable technical documentation
Company name:
FAAC S.p.A. Soc. Unipersonale
Address:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
Hereby declares that the partly completed machinery:
Description:
Gear motor for sliding gates
Model:
FALCON 14 M - FALCON 14 MC - FALCON 20 M- FALCON 20
MC - FALCON 15 M - FALCON 15 MC
the following essential requirements of the Machinery Directive 2006/42/EC
(including all applicable amendments) have been applied and fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.3, 1.2.5, 1.2.6, 1.3.1,
1.3.2, 1.3.4, 1.3.6, 1.3.9, 1.4.1, 1.4.2.1, 1.5.1, 1.5.2,
1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.10, 1.5.11, 1.6.1, 1.6.4,
1.7.1, 1.7.2, 1.7.3, 1.7.4.2, 1.7.4.3
and that the relevant technical documentation has been compiled in compliance
with part B of Annex VII.
Furthermore, the following harmonised standards have been applied:
EN60335-1:2012 + A11:2014
EN60335-2-103:2015
EN 12100:2010
EN 13849-1:2015 CAT 2 PL “C”
EN 13849-2:2012
Undertakes to transmit by mail or by e-mail, in response to a reasoned request by
the national authorities, relevant information on the partly completed machinery.
It is also declared that the partly completed machinery identified above may not be com-
missioned until the final machine - into which it will be incorporated - has been declared
complaint with the provisions of the above mentioned Machine Directive 2006/42/EC.
Bologna, Italy, 04-12-2018
CEO
A. Marcellan
EU DECLARATION OF CONFORMITY
The Manufacturer
Company name:
FAAC S.p.A. Soc. Unipersonale
Address:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares under his sole responsibility that the following product:
Description:
Gear motor for sliding gates
Model:
FALCON 14 M - FALCON 14 MC - FALCON 20 M- FALCON 20
MC - FALCON 15 M - FALCON 15 MC
Complies with the following relevant Union harmonization legislations:
2014/30/EU
2011/65/EU
Furthermore, the following harmonised standards have been applied:
EN61000-6-2:2005
EN61000-6-3:2007 + A1:2011
Bologna, Italy, 04-12-2018
CEO
A. Marcellan
FALCON M
6
00058I0616 - Rev.1
Tr
ansla
tion of the original instruc
tions
ENGLISH
Summary of Contents for falcon m
Page 1: ...FALCON M...
Page 26: ...FALCON M_Utente 8 00058I0616 Rev 1...
Page 41: ...FALCON M_Utente 8 00058I0616 Rev 1...