Genie S-80, Service Manual

Page: 27 / 353

Part No. 122985 S-80 • S-85 • S-80X 2 - 7
Section 2 • Specifications February 2012
REV D SPECIFICATIONS
Injection system
Injection pump make Zexel
Injection pump pressure 1707 to 1849 psi
117.7 to 127.5 bar
Injector opening pressure ~2000 psi
~138 bar
Fuel Requirement
For fuel requirements, refer to the engine Operator's
Manual on your machine.
Engine coolant
Capacity 12.5 quarts
11.8 liters
Batteries
Type 12V DC
Group 31
Quantity 1
Cold cranking ampere 1000A
Reserve capacity @ 25A rate 200 minutes
Alternator output 90A, 12V DC
Fan belt deflection
3
/
8
to
1
/
2
in
9 to 12 mm
Perkins 804D-33 Engine
Displacement 201 cu in
3.3 liters
Number of cylinders 4
Bore and stroke 3.70 x 4.72 inches
94 x 120 mm
Horsepower 63 @ 2600 rpm
47 KW @ 2600 rpm
Firing order 1 - 3 - 4 - 2
Compression ratio 22:1
Compression pressure 300 to 500 psi
20.7 to 34.5 bar
Pressure (psi or bar) of lowest cylinder must be
within 50 psi / 3.45 bar of highest cylinder
Low idle 1650 rpm
Frequency 335.5 Hz
High idle 2300 rpm
Frequency 467.7 Hz
Governor mechanical all speed
Valve clearance, cold
Intake 0.0098 in
0.25 mm
Exhaust 0.0098 in
0.25 mm
Lubrication system
Oil pressure @ 2000 rpm 40-60 psi
2.8-4.1 bar
Oil capacity 10.6 quarts
(including filter) 10 liters
Oil viscosity requirements
Units ship with 15W-40.
Extreme operating temperatures my require the use of
alternative engine oils. For oil requirements, refer to the
Engine Operator Handbook on your machine.
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.