Genie S-80, Service Manual

Page: 24 / 353

S-80 • S-85 • S-80X Part No. 122985 2 - 4
Section 2 • Specifications February 2012
REV D SPECIFICATIONS
Continuous improvement of our products is a
Genie policy. Product specifications are subject
to change without notice.
Valve Coil Resistance
Specifications
Note: The following coil resistance specifications
are at an ambient temperature of 68°F / 20°C. As
valve coil resistance is sensitive to changes in air
temperature, the coil resistance will typically
increase or decrease by 4% for each 18°F / -7.8°C
that your air temperature increases or decreases
from 68°F / 20°C.
Valve coil resistance specifications
Proportional solenoid valve 3.7

(schematic items SE)
Proportional solenoid valve 4.8

(schematic items SR and SF)
2 position 3 way solenoid valve 4.1

(schematic items SJ)
2 position 3 way solenoid valve 9

(schematic items SK)
3 position 4 way solenoid valve 7.2

(schematic items SI and SL)
Solenoid valve, NO, Poppet 5.6

(schematic items SP and SQ)
Function manifold
System relief pressure 3200 psi
(measured at
PTEST
port) 221 bar
Boom down relief pressure 2400 psi
(measured at
PTEST
port) 165 bar
Boom extend relief pressure 2400 psi
(measured at
PTEST
port) 165 bar
Steer/axle extend 3.5 gpm
flow regulator 13.2 L/min
Oscillate relief pressure 950 psi
65.5 bar
Drive manifold
Hot oil relief pressure 280 psi
19.3 bar
Brake release pressure
Wheel drive hubs 240 psi
16.5 bar
Drive motors
Displacement per revolution, variable 0.9 to 2.7 cu in
(2 speed motor) 14.7 to 45 cc
Hydraulic filters
High pressure filter Beta
3

200
High pressure filter 102 psi
bypass pressure 7 bar
Medium pressure filter Beta
3

200
Medium pressure filter 51 psi
bypass pressure 3.5 bar
Hydraulic tank 10 micron with
return filter 25 psi / 1.7 bar bypass