GE Vivid S5 User Manual Download Page 149

Page: 149 / 690

Basic scanning operations

Vivid S5/Vivid S6 User Manual

131

R2424458-100 Rev. 2

To edit annotation

Press the alphanumeric key

TEXT

Press

Edit

in the

Annotation menu

The pointer is changed to a cross marker.

Trackball to the annotation to edit.

Press

SET

Once selected, the annotation can be moved freely.
The text can be edited using the following alphanumeric
keys:
•

RIGHT ARROW

: moves the text cursor forward.

•

LEFT ARROW

: moves the text cursor backward.

•

TAB

: moves the text cursor by word forward.

•

BACKSPACE

: deletes backward.

•

DELETE

: deletes the selected word.

Do the appropriate changes to the annotation.

Press

SET

to anchor the edited annotation.

To erase annotation

To erase all annotations on the screen in one operation, press
the alphanumeric key

PAGE ERASE

To erase annotation words one at a time, hit

DELETE

button on

the alphanumeric keyboard. Each button-press will delete a
single word in reversed order.

Summary of Contents for Vivid S5


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vivid S5

Reviews:

Related manuals for Vivid S5

Brands by name

Popular brands

GE Vivid S5, User Manual

Search results

Summary of Contents for Vivid S5

Reviews:

Related manuals for Vivid S5

Brands by name

Popular brands