GE Vivid S5 User Manual Download Page 605

Page: 605 / 690

Presets and System setup

Vivid S5/Vivid S6 User Manual

587

R2424458-100 Rev. 2

• TCP-IP

Sets the Transmission
Protocol/Internet Protocol.

Admin

System

page 633

• Settings

Sets the date and time format,
language and units.

Admin

• Test

Enables testing of the different
parts of the unit.

Admin

About

Displays information about the
software, hardware and probes.

All

page 635

Administration

page 636

• Disk management

Enables the management of the
hard disk space while
maintaining the patient database
on the system.

All

page 464

• Backup

Local archive and system
configuration backup.

Admin

• Restore

Restore local archive and
system configuration from a
backup.

Admin

• Users

Operator and referring staff
registration, operator's rights
settings.

Admin

• System administration

Keeps track of all the options
implemented in the unit.

Admin

• Unlock patient

Unlock patient records that were
not properly finished.

Admin

Service

This sheet is for service staff
only. Deals with printer definition
and keyboard configuration.

Admin

Category and sublevel

Description

access

Refer to

Summary of Contents for Vivid S5


















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vivid S5

Reviews:

Related manuals for Vivid S5

Brands by name

Popular brands

GE Vivid S5, User Manual

Search results

Summary of Contents for Vivid S5

Reviews:

Related manuals for Vivid S5

Brands by name

Popular brands