GE
D
IRECTION
FQ091019, R
EVISION
2
V
IVID Q
N S
ERVICE
M
ANUAL
3-66
Section 3-8 - Mounting the Vivid q N on the SafeLock Cart (optional)
Mounting the Vivid q N on the SafeLock Cart (cont’d)
2.) Push the scanner down and
backwards
, until it locks into place against the locking tooth.
An audible click will be heard as the scanner locks into position. There will now be a gap the width
of one finger between the SafeLock Cart arm rest and the front of the scanner.
3.) If necessary, perform the alignment procedure as described in
3-8-2 "Adjusting the SafeLock Cart
Locking Mechanism" on page 3-68
4.) Connect the LAN Cable from the cart to the LAN connector on the Vivid q N rear panel.
5.) Connect the Docking Connector to the rear of the scanner, as shown below.
Figure 3-63 Vivid q N Scanner Mounted on SafeLock Cart
Figure 3-64 Vivid q N
Rear Panel
Figure 3-65 Connecting the Docking Connector to the Rear of Scanner
Docking Connector
LAN Connector
USB Port
Docking Connector
