GE Vivid q N, Service Manual

Page: 293 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 4 - General Procedures and Functional Checks 4-39
Section 4-5
System Turnover Checklist
Before returning the Vivid q N ultrasound scanner to regular operational use, the System Configuration
settings should be checked. In 2D-Mode, press
Config on the keyboard and check the settings in
accordance with those listed or referenced in Table 4-22 below
4-5-1 Software Configuration Checks
Table 4-22 Software Configuration Checklist
Step Task Check
1
Check the date and time settings. Refer to "Date and Time Adjustments" on page 3-71 .
2
Check the language settings.Refer to "Language Selection" on page 3-72 .
3
Ensure that all of the software options are configured correctly. Refer to "Software Options
Configuration" on page 3-84 .
4
Ensure that the hospital details are configured correctly. Refer to Table 3-6 on page 3-70.
5
Ensure that the VCR is configured as required for the specific site and country. Refer to video
converter setup - see
Figure 3-45 on page 3-48 .
6
Ensure that the measurement units are configured as required for the specific site and country.Refer
to
"Units of Measure" on page 3-74 .
7
Ensure that the connectivity network settings have not been modified and are configured as required
for the specific site. Refer to
"Set the Scanner’s Network Information" on page 3-99 .