GE Vivid q N, Service Manual

Page: 586 / 698

GE
D
IRECTION
FQ091019, R
EVISION
2 V
IVID Q
N S
ERVICE
M
ANUAL
8-80 Section 8-4 - SafeLock Cart Components Replacement
NOTE: The movement should be smooth and there must be no pinching of the cables.
Slide the top-shelf up and down a number of times and check that the cables do not disturb the
up-down movement of the cart’s top-shelf - see
Figure 8-96 .
12.)Return the Upper Rear Cover as described in Service Manual Direction R2423163-100, Revision
3, Chapter 8, section 8-4-3-4.
13.)Return the Upper Cover (rear) and Lower Cover (rear) of the SafeLock Cart as described in "Upper
Cover (Rear) Installation Procedure" on page 8-66 and "Lower Cover (Rear) Installation Procedure"
on page 8-73 .
14.)Once more, slide the top-shelf up and down a number of times and check that the movement is
smooth and that there is no interference of the cables with the up-down movement of the cart’s
top-shelf.
15) Proceed to perform the following functionality tests:
- "SafeLock Cart - Grounding Continuity" on page 10-22
- "SafeLock Cart - Chassis Current Leakage Test" on page 10-24
Figure 8-96 Fully-raised (left) and Fully-lowered Positions (right)