GE VersaMax IC200PWR001, User Manual

Page: 329 / 521

10-14 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
10
IC200ALG240
Analog Input Module, 16 Bit Voltage/Current, 1500 V AC Isolation, 8 Channels
Configurable Parameters
The default parameters of this module can be used in many applications. The
module can be software-configured when it is installed in a VersaMax PLC
system, or an I/O Station controlled by a Network Interface Unit that is version
2.0 or above.
Module
Parameter
Description
Default Choices
Analog Input
Data
Reference
Starting offset for the module’s analog input data.
User selectable
Analog Input
Data Length
Word length of the module’s analog input data.
8 0–8
Line
Frequency
Specifies the line filter frequency.
60 Hz 50 Hz, 60 Hz
Report Faults Enables or disables Fault Reporting for the entire
Module.
Enabled Enabled,
Disabled
%AI Default
/Hold Last State
Specifies whether the module will go to the specified
channel defaults (see below) or hold their last states if
power or communications are lost.
Default Default /Hold
Current
/Voltage
Specifies whether the channel will be a voltage or
current input. If the Channel type is Current, the range
is 4 to 20mA. If Channel type is Voltage, the range is
–10 to +10V.
I (Current) I (Current),
V (Voltage)
Channel
Active
Specifies if the channel should input data received
from the CPU or NIU. If a channel is “inactive” space
is still allocated for it.
Active Inactive (off),
Active (on)
Span Low
Actual current (in microAmps) or voltage (in milliVolts)
to be scaled from low engineering units value.
4,000
µ
A 0 to 25,000
µ
A
–10,000 to
+10,000mV
Span High
Actual current in microAmps or voltage in millivolts to
be scaled from the high engineering units value.
20,000
µ
A 0 to 25,000
µ
A
–10,000 to
+10,000mV
Engineering
Low
The engineering units value that is considered
equivalent to the low span (actual) value.
4000 0 to 25,000
µ
A
–10,000 to
+10,000mV
Engineering
High
The engineering units value that is considered
equivalent to the high span (actual) value.
20000 0 to 25,000
µ
A
–10,000 to
+10,000mV
Alarm Low
The low alarm limit for the channel, in engineering
units.
4000 -32768 to +32767
Alarm High
The high alarm limit for the channel, in engineering
units.
20000 -32768 to +32767
Default
The value to be input when the module is in a default
condition.
0 -32768 to +32767