GE SPM Series, Instruction Manual

Page: 68 / 126

5-
12
SPM Synchronous Motor Protection & Control GE Power Management
5.4 CONFIGURATIONS MENU 5 SETPOINTS
5
5.4 CONFIGURATIONS MENU 5.4.1 MOTOR TYPE
FUNCTION:
The type of motor is selected here. Different setpoints are used for the two different motors and operation of
the relay is altered. This configuration setpoint must be entered correctly.
5.4.2 LINE FREQUENCY
FUNCTION:
Enter line frequency here for system.
5.4.3 POWER FACTOR REFERENCE
FUNCTION:
Enter the source for the voltage reference for power factor calculations. See Section 2.4, Electrical installation
for proper wiring details.
5.4.4 RTU ADDRESS
FUNCTION:
Enter the Modbus slave address here which must be unique to all SPMs on the same communication link.
5.4.5 BAUD RATE
FUNCTION:
This setpoint allows the user to select the desired baud rate.
5.4.6 PARITY
FUNCTION:
Enter the type of parity necessary.
MOTOR: Collr-Ring
ENTER to modify
Range: Collr-Ring, Brushless
LINE FREQ: 60 Hz
ENTER to modify Range: 50 Hz, 60 Hz
PF REF: Internal
ENTER to modify
Range: Internal, External
RTU ADDRESS: 1
ENTER to modify Range: 1 to 254
Step: 1
BAUD RATE: 19.2k
ENTER to modify
Range: 300, 600, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115k
PARITY: None
ENTER to modify Range: None, Odd, Even