GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Worklist
9-worklist.fm
Page no. 93
Chapter 9
3-4
What If...?
•
Nothing happens when you follow the operating instructions:
-
Check the system power.
-
Check for loose cable connections.
•
The AWS goes back to monitor
OK
prompt:
-
Resetting or disconnecting/reconnecting the bar code scanner may cause the workstation to
return to the monitor
OK
prompt. In this case:
Type the command go
<Enter>
to return to the normal working mode.
•
The scanner does not read a bar code symbol:
-
Be sure the scanning system is programmed to read the type of bar code you are trying to scan.
Refer to section
3-2 Set default configuration on page 92
-
Be sure the bar code symbol is not defaced.
-
Be sure that you are holding the scanner correctly to scan the symbol, as illustrated below. The
scan head must touch and cover every bar and space on the symbol. You can tilt the scanner for-
ward or backward. Practice will quickly show you how to hold the scanner.
Right
Wrong
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
