Chapter 9
Page no. 90
9-worklist.fm
GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Worklist
2-3
Edit Patient
To edit patient information (only possible before making the first acquisition for the patient):
•
Select the patient in the list and click on the
Edit...
button.
The Medical Procedure Card window is displayed.
This function is not available for information received from an HIS/RIS Worklist.
•
When the changes to card entries are complete, click
Save
or
Start Exam
.
2-4
Image Acquisition - New Examination
To add an exam for an existing patient:
•
Select the patient name in the Patient list on the Worklist by clicking on it.
•
Click on
Start Exam
.
The remaining procedure is the same as for a new patient, except that the patient and procedure infor-
mation fields (other than operator and physician) in the Medical Procedure Card are already complete
and cannot be modified (displayed in grey).
2-5
Image Review
To review images stored on the workstation image disk, return to the Browser screen:
•
In the Browser screen, select the desired images. Select first the patient, and then the exam (study)
by clicking on them.
To select only a specific image for display, click on it in the list. To add more images, click on them in
the list while holding down the
<Ctrl>
key on the keyboard.
•
Click the
Review exam
button.
The same functions that are available after image acquisition (image adjustment, measurements, anno-
tations, etc.) are also available in review mode, with the exception of the 2D Localization function.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
