GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Viewer
11-viewer.fm
Page no. 99
Chapter 11
Chapter 11 Viewer
1
Overview
•
The Viewer window is displayed:
-
When the
Review exam
button in the Browser window is clicked after selection of a Patient, exami-
nations, or series. The Viewer window opens and displays the first acquired image.
-
When the
Start Exam
button in the Worklist window is clicked after selection of a Patient in the
Worklist. The Viewer window opens, with the Medical Procedure Card displayed, ready to display the
acquired image.
The Viewer is used to display, manipulate, and analyze images that have been acquired using the Digital
Detector or recalled from the image disk for review.
•
Most of the screen is used for the
Viewing Area
(1), in which images are displayed.
•
At the left of the screen, there is a Command window, which includes three main sections:
-
The Mosaic Image Browser (2).
The Control Panel (3).
Two selection buttons at the top of the panel allow one of two different Control Panels (
View Control
and
Annotation
) to be displayed, according to the functions required. A third selection is possible if
the Stereotaxy option is present. Functions available from the two panels are described in sections
.
-
Function panel (4). Provides access to the Medical Procedure Card, image reprocessing, image print-
ing, Scrapbook, image quality check, Middle mouse button function selection, and exit from the
Viewer.
2
3
4
1
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
