GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Browser
8-browser.fm
Page no. 71
Chapter 8
•
If the remote host cannot be reached, a pop-up message reports this fact; you should verify that
the remote host is operational and check the network cabling.
Call your network manager if the problem persists.
•
If the Auto Push option is selected in Medical Application preferences, then all images in this
exam will be automatically sent to the selected destination after exam closure.
•
To archive exams on the mass archiver, the archiver must be selected in the same way as a
remote host (select its icon as the drag-and-drop target, or its address as the push destination).
During a network transfer:
•
To monitor network transfer tasks, click on the Network status display to open the Network queues
window, shown below:
Done
: close queue window
Click on a job to select it (hold
<
Ctrl>
to select more than one)
then click on
Clear
to remove
job(s) from the queue
Refresh
: update the queue window
(the queue window is NOT updated
automatically each time a job is fin-
ished).
Pause
: temporarily halt the queue
Resume
: restart a paused queue
Job currently in progress
Pause
653/1 Active
2899 Pending
273/3
Resume
Clear
Pause
Resume
Clear
Refresh
Done
Push images
Pull images
653/1 Active
2899 Pending
273/3
Network queues
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
