Chapter 14
Page no. 148
14-cdrom.fm
GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Interchange Media
The presence of the CD-R option is indicated by an icon in the Network panel of the Browser
window (upper left corner).
•
An icon appears below each of the lists in the Browser window. These icons may be
turned off and on in the Browser preferences window, accessed through the Tools menu, see
Chapter
.
2
Using the Interchange Media option
Recordable CDs are considerably more sensitive to damage than the conventional CD-ROMs that you
may be familiar with. Respect the handling instructions below.
2-1
Handling CD-R media
! Notice:
To avoid image loss, never touch the recordable surface of a recordable CD (CD-R). Handle the
disk only by the outer edge. Do not place it face down on a hard surface. Fingerprints or scratches
will make the disk unusable.
Before usage, verify that the CD-R surface has no visible scratches. If there are any scratches, do
NOT use the CD-R.
•
Store the disk in its protective case. Proper storage helps protect the data from damage due to
scratches on the disk surface.
•
Do not leave the disk in direct sunlight or in a hot, humid environment. These conditions can warp
and damage the disk.
•
Use only a felt tip permanent pen when labeling. Write only on the printed area or on the clear inner
diameter of the disk. Never use a ballpoint or hard point writing tool as it may damage the disk. Do
not use adhesive labels.
•
Use a soft, lint-free cloth to remove spots, dust, or fingerprints from the disk. Always wipe from the
center to the outside edge of the disk. Never wipe the disk in a circular motion.
•
Do not use any chemical-based cleaners. These can damage the disk.
2-2
Saving images on recordable CD
Note:
We recommend the use of Senographe DS-compatible CD-R media that have been officially vali-
dated for performance and reliability of patient data interchange on the Senographe DS system.
These are identified by GE labelling. GE cannot take responsibility for any data loss or incompat-
ibility with other systems resulting from the use of media not supported by Senographe DS.
To order Senographe DS-compatible media, contact your local sales representative.
A recordable CD (CD-R) can only be recorded once.
When saving image data on a CD-R, you must always use a BLANK CD-R.
CDR
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
