CHAPTER 6: ACTUAL VALUES
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
6–19
6.3.4
Temperature
PATH: ACTUAL VALUES
ZV
A2 METERING DATA
ZV
TEMPERATURE
Note
These messages are seen only if the corresponding RTDs are programmed. The actual
messages reflect the RTD Names as programmed.
The current level of the 12 RTDs will be displayed here. If the RTD is not connected, the
value will be “No RTD”. If the RTD is shorted, then “---” will be displayed. If no RTDs are
programmed in the
S7 RTD TEMPERATURE
setpoints menu, the
THIS FEATURE NOT
PROGRAMMED
flash message will appear when an attempt is made to enter this group of
messages.
TEMPERATURE
[
Z
]
HOTTEST STATOR RTD
RTD#1: 40°C
Range: –50 to 250°C, No RTD Seen only
if at least 1 RTD programmed
as Stator
MESSAGE
RTD #1
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #2
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #3
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #4
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #5
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #6
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #7
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #8
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #9
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #10
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #11
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
MESSAGE
RTD #12
TEMPERATURE: 40°C
Range: –50 to 250°C, No RTD (open)
--- (shorted)
