GE Lullaby Warmer Maintenance And Service Manual Download Page 70

Page: 70 / 165

Warmer

5.5

Assembly of Pillar and Bed

Illustration

Figure 56:

Bed Base Assembly

Description

To assemble the Pillar and the bed ensure that you have the following:



Bed base



M8 Nyloc Nuts (Qty 4)



Tooth washers (Qty 4)



M8 Box Spanner

Instructions to assemble the base and the bed

Position the bed base assembly on the bed tilt mechanism as shown in Figure 56.

Fasten the M8 Nyloc nuts and the tooth washers (Qty 4) securely to the assembly.

Note: Before fixing the bed base to the pillar assembly ensure that the bed tilt mechanism is in

parallel to the floor. This will help you to install the bed without difficulty.

M8 Nyloc
Nut

Bed Base

Bed tilt
Mechanism

Tooth Washer

Summary of Contents for Lullaby Warmer






















































































































































Search results

Summary of Contents for Lullaby Warmer

Reviews:

Related manuals for Lullaby Warmer

Brands by name

Popular brands

GE Lullaby Warmer, Maintenance And Service Manual

Search results

Summary of Contents for Lullaby Warmer

Reviews:

Related manuals for Lullaby Warmer

Brands by name

Popular brands