GE Lullaby Warmer, Maintenance And Service Manual

Page: 82 / 165

56 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. Lullaby
TM
Warmer
5.8.11 Mounting the Retaining Clip
Illustration Description
Figure 79: Mounting the
Resuscitation Bag Clip
Mounting the Retaining Clip:
1. Insert the clip and turn to lock in the
dovetail.
5.8.12 Assembling the slotted Bedside Panel
Illustration
Description
Figure 80: Assembling the Slotted
Bedside Panel
Assembling the Slotted Bedside Panel:
1. Press the endpins in and lift the
bedside panel out of the notches. Refer
Operation and Maintenance manual
for instructions.
2. Hold the Slotted bedside panel and
guide the endpins into the notches
located in the bed.
3. Release the endpins.
4. Ensure that the Slotted bedside panel
is held in place firmly.
5.9 Checkout Procedures
After the Lullaby TM Warmer is fully installed carry out the mandatory checkout procedures. Refer
to
0
System Setup and Checkout Procedures.
Slotted Bed
Side Panel
Retaining
Clip