GE Lullaby Warmer, Maintenance And Service Manual

Page: 34 / 165

8 2042376-001 Rev G ©2012 General Electric Company. All rights reserved. Lullaby
TM
Warmer
1.5 Displays
The Lullaby TM Warmer has three displays and a bar graph.
Illustration Description
Figure 12: Displays
The displays on the control panel
are explained as below:

Baby temperature display
indicates the temperature
measured by the skin
temperature probe.
Note: The skin probe must be
properly connected to the
warmer and the baby for an
accurate baby temperature
measurement.

Control temperature display
indicates
the control
temperature the user selects in
the Baby Mode.

The baby temperature range is
from 30.0 – 38.0°C.
 The control temperature
display is not active in the
Manual Mode.

% Power bar graph indicates
power
level selected in
increments of 5%.

APGAR timer display indicates
clocked time in minutes and
seconds up to a maximum of
60 minutes. The APGAR timer
will beep at 1, 5 and 10
minutes, and then every 5
minutes until clocked time of 60
minutes in total is reset to zero.
Baby
Tempera
ture
Control
Temperature
APGAR
Timer
% Power
Bar
graph
Indicator
Global
Alarm
Check
baby
Indicator