GE Lullaby Warmer Maintenance And Service Manual Download Page 33

Page: 33 / 165

Lullaby

1.4.2

Baby Mode

Illustration

Description

Figure 11:

Baby Mode

Baby

Mode

–

Adjusting

the

temperature.



In  the  Baby  Mode  the
warmer  controls  increase  or
decrease  in  the  heater
output to a desired baby set
temperature  entered  by  the
user.



Heater output is based on
measured

differences

between the set temperature
and

the

skin

probe

temperature reading. You
can

enter

desired

set

temperatures from 30 – 38
°C using the Temperature
increase/decrease

keys,

which are located between
the two control mode keys.
This value is shown in the set
temperature display.



The

Baby’s

actual

temperature  is  shown  in  the
upper  display  i.e.  Baby
Temperature  display.  The
Baby  Mode  is  indicated  by
the  green  indicator  located
above the Baby Mode key as
seen in Figure 11.

Baby Mode
Indicator

Baby Mode Key

Baby
Temperature
Display

Increase/ Decrease Keys

Summary of Contents for Lullaby Warmer






















































































































































Search results

Summary of Contents for Lullaby Warmer

Reviews:

Related manuals for Lullaby Warmer

Brands by name

Popular brands

GE Lullaby Warmer, Maintenance And Service Manual

Search results

Summary of Contents for Lullaby Warmer

Reviews:

Related manuals for Lullaby Warmer

Brands by name

Popular brands