CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.13.10
13.2.1.2
GPRS
General Packet Radio Service. A global standard for wireless
communications. It supports a range of bandwidths and can transmit and
receive both small bursts and large amounts of data.
13.2.2
Phone Number
A menu option that sets the phone number of the PC running the upload/
download software.
13.2.3
IP Address
A menu option that configures the address of the selected TCP/IP receiver.
13.2.4
Site Initiated
A menu option that allows an upload/download session between the module
and the PC to be initiated from a keypad.
13.2.5
Remote Initiated
A menu option that allows an upload/download session between the module
and the PC to be initiated by the PC. The PC dials into the module. You must
dial the data phone number to dial into the GSM for upload/download.
This option is dependent on other options (Allow Calls From, Auto-answer and
Call Back Req’d).
13.2.6
Allow Calls From
A menu option that answers calls from a known phone number only. To enable
this option, you must enable Remote Initiated and program the phone number
of the PC in Up/Download>Phone Number.
13.2.7
Auto-answer
A menu option that configures the CS7002 to automatically answer any
incoming calls. To enable this option, you must enable Remote Initiated.
13.2.8
Call Back Req’d
A menu option that configures the CS7002 to call back the PC in order to
initiate an upload/download session. To enable this option, you must enable
Remote Initiated.
13.2.9
Auto U/D at Test Time
A menu option that configures the module to automatically dial the PC to
initiate an upload/download session after an autotest. You must program the
autotest on the control panel.
13.3.1
GSM
Global System for Mobile Communications. A global standard for wireless
communications. It supports narrowband Time Division Multiple Access
(TDMA).
A menu entry that groups GSM connection options.
13.3.1.1
SIM PIN Code
A menu option that configures the code used to enroll the SIM card on the
GSM network.
13.3.1.2
GSM Operator
A menu entry that groups information on the current GSM operator and allows
a specific GSM operator to be manually selected.
13.3.1.2.1
Operator Selection
A menu option that configures the GSM network operator used by the module.
Set this to 00000 to allow the SIM card automatically select a network operator.
Alternatively, enter an operator ID code to manually select a network operator.
13.3.1.2.2
Current Operator
A menu option that displays the name of the automatically or manually
selected GSM network operator. This option is valid only when the module is
logged into the GSM network.
13.3.1.3
SMS Service Centre Address
A menu option that configures the SMS service centre phone number. Usually,
this number should be left blank as it is dialled automatically by the SIM card. It
should include the country code.
13.3.1.4
RSSI Value
Remote Signal Strength Indication Value. This is a measure of the RF
reception and is similar to the indication on a mobile phone.
A menu entry that displays the current RSSI value. The RSSI value is
periodically updated when logged into the network. RSSI values range from 0
to 31 with 99 as unknown.
Location
Term
Definition
