GE Security CS175 Page 42 Installer Manual Download

Page: 42 / 209

CS875-575-375-275-175 Installers Manual with CS5500 keypad

A.5.3

Press

to decrease the current value by one.

Press

to clear the current value to 0.

Press the number keys to enter the value.

Press

to accept the changes.

If the new value is valid, the keypad beeps once to confirm the change and returns to the menu option.

If the new value is invalid, the keypad beeps three times to reject the change and returns to the menu
option.

Press

to cancel the changes and return to the menu option.

5.5.4 Changing phone numbers and phone prefixes

Navigate with the

µ¶

keys to the relevant menu option and press

The current value for the menu option is displayed, for example,

4567999

Do one of the following:

Press

to toggle between insert mode and overwrite mode (insert mode allows you to insert new

numbers and overwrite mode allows you to overwrite existing numbers).

Press

to delete the number at the cursor position.

Press

to delete all the numbers from the number at the cursor position to the end of the string.

Do one of the following:

Press the keys

to insert new numbers.

Press

to insert G.

Press

to insert a star.

Press

to insert #.

Press

to insert a four-second delay when programming numbers on the control panel.

Press

to when programming numbers on the CS7002 GPRS module.

Press

to insert P (this enables pulse dialing).

Press

to accept the changes.

If the new number is valid, the keypad beeps once to confirm the change and returns to the menu option.

If the new number is invalid, the keypad beeps three times to reject the change and returns to the menu
option.

Press

to cancel the changes and return to the menu option.

5.6 Exiting the menu system

Press

to display the

OK to Exit

prompt.

Press

at this prompt to exit the menu system.

5.7 Editing text

5.7.1 Overview

The CSx75 has a text editor that includes a word library. You can use this editor to change the text of certain
programmable text options.

Summary of Contents for CS175


















































































































































































































Search results

Summary of Contents for CS175

Reviews:

Related manuals for CS175

Brands by name

Popular brands

GE Security CS175, Installer Manual

Search results

Summary of Contents for CS175

Reviews:

Related manuals for CS175

Brands by name

Popular brands