CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.12.6
12.4 Glossary
Location
Term
Definition
12
CS1700 Proximity Readers
A proximity card reader/door control module that can be programmed to
control access in any or all areas.
12.1
Prox Reader 113
A menu entry that groups all options for the selected proximity reader.
12.1.1
Badge Functions
A menu entry that groups the functions activated by Single Badge, Double
Badge and Badge Hold actions.
12.1.1.1
Single Badge (1 Beep)
A menu entry that groups the functions activated by holding a proximity card
once against the proximity reader.
12.1.1.2
Double Badge (2 Beeps)
A menu entry that groups the functions activated by holding a proximity card
against the proximity reader twice within the time set in Badge Hold.
12.1.1.3
Badge Hold (3 Beeps)
A menu entry that groups the functions activated by holding a proximity card
near the proximity reader for longer than the time set in Badge Hold.
12.1.1.1.1
Send Code Entry Function
A menu option that enables the send code entry function for the selected
proximity reader action. The actions are Single Badge, Double Badge and
Badge Hold. This function sends the same command to the control panel,
using the proximity card, as a keypad would send if a valid code were entered.
For example, if the system is armed, the selected action disarms it.
12.1.1.1.2
Arm Away
A menu option that enables the arm away function for the selected proximity
reader action. The actions are Single Badge, Double Badge and Badge Hold.
12.1.1.1.3
Arm Stay
A menu option that enables the arm stay function for the selected proximity
reader action. The actions are Single Badge, Double Badge and Badge Hold.
12.1.1.1.4
Disarm
A menu option that enables the disarm function for the selected proximity
reader action. The actions are Single Badge, Double Badge and Badge Hold.
12.1.1.1.5
Keyfob Funct 1
A menu option that sends a keyfob function 1 event for the selected proximity
reader action. The actions are Single Badge, Double Badge and Badge Hold.
12.1.1.1.6
Keyfob Funct 2
A menu option that sends a keyfob function 2 event for the selected proximity
reader action. The actions are Single Badge, Double Badge and Badge Hold.
12.1.1.1.7
Broadcast X10 Function
A menu option that causes the proximity reader to transmit an X-10 function to
the home automation system.
12.1.1.1.8
Activate Relay
A menu option that activates the proximity reader’s built in relay driver instead
of an external relay driver.
12.1.2
X-10 Functions
A menu entry that groups X-10 device information and the functions for the
selected proximity reader.
The X-10 functions are linked to the access reader. It is possible to control X-
10 devices using the badge on the card reader. It is also possible to configure
the actions that are activated by each card action.
0 All units off
1 All lights on
2 On
3 Off All others
4 Dim
5 Bright
6 All lights off
12.1.2.1
Module Number
A menu option that sets the X-10 module number used to identify a particular
X-10 device on the selected module.
A CSx75 bus module number is assigned to each system module. The system
uses this number to identify the module. It is also used to report module
problems (such as tampers and module supervision lost) to the central station.
