manualshive.com logo in svg

GE Security CS175, Installer Manual

The GE Security CS175 Installer Manual is a comprehensive guide for setting up and configuring your security system. This essential manual ensures a smooth installation process, providing detailed instructions and troubleshooting tips. Experience peace of mind knowing you can access this user-friendly manual for free download at manualshive.com.

Share
Download
background image

CS875-575-375-275-175 Installers Manual with CS5500 keypad

B.2.32

2.8.3.2

Misc Commands

A menu entry that groups home automation commands. 

2.8.3.2.1

X-10 Message

A menu option that enables the control panel to respond to X-10 message 
commands sent by the home automation system. 

2.8.3.2.2

Store Comms Event

A menu command that allows a device connected to the serial port to send 
reports to the central station using the controls modem.

2.8.3.2.3

Zone Bypass Toggle

A menu option that enables the control panel to respond to zone bypass toggle 
commands sent by the home automation system. 

2.8.3.3

Programming

A menu entry that groups home automation commands. 

2.8.3.3.1

Program Data Request

A menu command request sent by the home automation system to the CS586 
Direct Connect module. It is used to read configuration data from the control 
panel through the serial port.

2.8.3.3.2

Program Data Command

A menu command request sent by the home automation system to the CS586 
Direct Connect module. It is used to configure the system through the serial 
port.

2.8.3.3.3

User Info Request

A menu command that allows the device connected to the serial port to read 
out the programmed settings for a particular user. This can be activated with a 
PIN or without a PIN. 

2.8.3.3.4

Set User Code

A menu entry that groups home automation commands. The home automation 
protocol allows new users to be defined in the control panel. These commands 
specify the user’s code.

2.8.3.3.5

Set User Authority

A menu entry that groups home automation commands. The home automation 
protocol allows new users to be defined in the control panel. These commands 
specify the user’s authority, for example, and arm/disarm. 

2.8.3.3.3.1

With PIN

A menu command request sent by the home automation system to the CS586 
direct connect module to grant user access with a PIN number only. 

2.8.3.3.3.2

Without PIN

A menu command request sent by the home automation system to the CS586 
direct connect module to grant user access without a PIN number.

2.8.3.3.6

Set Date/Time

A menu command request sent by the home automation system to the CS586 
direct connect module to set the time and date.

2.8.3.4

Keypad Functions

A menu entry that groups settings that enable home automation commands 
related to keypads. 

2.8.3.4.1

1st Keypad Function

A menu entry that groups keypad options that enable home automation 
commands. The commands activate the primary function of a keypad. These 
options are With PIN and Without PIN. 

2.8.3.4.1.1

With PIN

A menu command request sent by the home automation system to the CS586 
direct connect module to grant user access with a PIN number only. 

2.8.3.4.1.2

Without PIN

A menu command request sent by the home automation system to the CS586 
direct connect module to grant user access without a PIN number.

2.8.3.4.2

2nd Keypad Function

A menu option that enables the home automation command that activates the 
secondary function of a keypad.

2.8.3.4.3

Send Keypad Text

A menu command request sent by the home automation system to the control 
panel. It is used in terminal mode to allow the device connected to the serial 
port to put text on the keypad.

2.8.3.4.4

Keypad Terminal Mode

A menu option that makes the keypad a home automation terminal when 
requested by the CS586 direct connect module.

Location

Term

Definition

Summary of Contents for CS175


















































































































































































































Reviews:

No comments

Related manuals for CS175

Eaton PH1 Technical Manual preview
PH1
Brand: Eaton Pages: 32
Zenith FFH-185A Installation And Operating Manual preview
FFH-185A
Brand: Zenith Pages: 14
Observint T5 Quick Installation Manual preview
T5
Brand: Observint Pages: 2
Gadgets and Gear 96-007 Quick Start Manual preview
96-007
Brand: Gadgets and Gear Pages: 2
L-Acoustics X15 HIQ User Manual preview
X15 HIQ
Brand: L-Acoustics Pages: 38
L-Acoustics KS28 Rigging Manual preview
KS28
Brand: L-Acoustics Pages: 31
L-Acoustics K2 WST User Manual preview
K2 WST
Brand: L-Acoustics Pages: 24
L-Acoustics KARA Owner'S Manual preview
KARA
Brand: L-Acoustics Pages: 201
Xiaomi AW200 User Manual preview
AW200
Brand: Xiaomi Pages: 36
GATmatic GM-720 Manual preview
GM-720
Brand: GATmatic Pages: 16
RainWater Harvesting RWH-FL01 Installation Instructions preview
RWH-FL01
Brand: RainWater Harvesting Pages: 3
Onkyo HTP-L50 Instruction Manual preview
HTP-L50
Brand: Onkyo Pages: 10
Sure Heat OVM21LP Insta;;Ation And Operating Instructions preview
OVM21LP
Brand: Sure Heat Pages: 10
Tattletale GLASS BREAK DETECTOR Quick Start Manual preview
GLASS BREAK DETECTOR
Brand: Tattletale Pages: 2
VADDIO RoboSHOT 12E HDBT Manual preview
RoboSHOT 12E HDBT
Brand: VADDIO Pages: 2
Stealth Cam STC-I890 User Manual preview
STC-I890
Brand: Stealth Cam Pages: 45
EAW Cinema MC4972 Technical Specifications preview
Cinema MC4972
Brand: EAW Pages: 2
QOLSYS IQ PANEL 2 PLUS Quick Manual preview
IQ PANEL 2 PLUS
Brand: QOLSYS Pages: 2

Brands by name

Popular brands

Load more brands