CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.2.20
2.4.1.2.1.4.2.1
Tampers and Restores
A menu option that sends a report to the selected phone number when a
tamper occurs. A report is also sent when the tamper is no longer active.
2.4.1.2.1.4.2.2
Zone Trouble and Restores
A menu option that sends a report to the selected phone number when a zone
trouble condition occurs. A report is also sent when the trouble condition is no
longer active.
2.4.1.2.1.4.2.3
Expander Trouble and Restores
A menu option that sends an expander trouble and restore report to the
selected phone number.
2.4.1.2.1.4.2.4
Siren/Phone Faults and Restores
A menu option that sends a report to the selected phone number when a siren
or phone fault occurs. A restore report is sent when the fault is fixed.
2.4.1.2.1.4.2.5
RF Sensor Lost and Restores
A menu option that sends a report to the selected phone number when an RF
sensor is missing. A restore report is sent to the central station when the
receiver receives a valid signal from the lost transmitter.
2.4.1.2.1.4.2.6
RF Low Battery and Restores
A menu option that sends a report to the selected phone number when a low
battery condition occurs in an RF sensor. A restore report is also sent when
the low battery condition is no longer active.
2.4.1.2.1.4.3
Power
A menu entry that groups the power events that are reported to the selected
phone number.
2.4.1.2.1.4.3.1
Power Trouble and Restores
A menu option menu option that reports mains failure, mains restore, low
battery and low battery restore events to the selected phone number.
2.4.1.2.1.4.3.2
Aux Overcurrent and Restores
A menu option that sends a report to the selected phone number when too
much current is detected. A restore report is also sent when the overcurrent
condition is fixed.
2.4.1.2.1.4.4
Communications
A menu entry that groups together the communication events that are reported
to the selected phone number.
2.4.1.2.1.4.4.1
Fail to Communicate
A menu option that reports a fail to communicate event to the selected phone
number.
2.4.1.2.1.4.4.2
Test Reports
A menu option that sends a test report to the selected phone number at pre-
programmed intervals. The units can be set in days or hours.
2.4.1.2.1.4.5.1
Program/Download
A menu option that reports programming and up/download events to the
selected phone number.
2.4.1.2.1.4.5.2
Zone Inactivity Monitor
A menu option that sends a report to the selected phone number when a zone
inactivity event occurs.
2.4.1.2.1.5
Fast Format Channels
A menu option that specifies which Fast Format channels are enabled. These
are grouped as Channels 1 – 8 and Channels 9 – 16.
2.4.1.3
Partition Account Codes
A menu option that lists the account codes for each partition. The account
code is sent when the relevant partition is reported.
2.4.1.4
Dial Attempts
A menu entry that groups dialling options.
2.4.1.4.1
ARC Dial Attempts
A menu option
that specifies the number of dial attempts (1 to 15 attempts)
that the communicator makes when reporting to the central station
.
2.4.1.4.2
FTC Dial Attempts
A menu entry that groups options related to the number of attempts that are
made to a specified phone number, before the Fail To Communicate condition
appears.
2.4.1.4.3
Voice/Siren Dial Attempts
A menu option
that specifies the number of dial attempts (1 to 15) that the
communicator makes for voice dialing, pager or Siren Tone formats.
Location
Term
Definition
