CS875-575-375-275-175 Installers Manual with CS5500 keypad
A.6.1
Chapter 6: Setting up a communicator
6.1 Reporting
The CSx75 supports different modes of reporting events to multiple central stations. There are six phone
numbers - each phone number has it own account code, protocol and events. The configured prefix is common to
all six phone numbers. If a four-second delay is specified in the prefix, the panel does not look for a dial tone, but
performs blind-dialling. The following scenarios are examples of how to set different modes of reporting.
6.1.1 Reporting to one phone number
The control panel reports events to one central station only. You specify settings for phone number 1. Events for
phone number 1 are enabled by default.
<
The characters B, C, D, E, F can be used in control panel account codes. The letter ‘A’ cannot be used as
part of the code as it is a termination digit
.
6.1.2 Backup reporting
Backup reporting configures the control panel to report to two or more central stations. The first phone number
belongs to the main central station and all other phone numbers belong to the backup central stations. Events are
reported to the first number but, if the panel cannot reach this number, it dials the backup number(s). The control
panel makes two calls to each number in sequence. It performs the sequence for the number of times specified in
ARC Dial Attempts
or until it receives a kiss off. The same account code is used to report to all numbers. Events
for phone number 1 are enabled by default and events for phone numbers 2 - 6 are disabled by default. If phone
number 1 and phone number 2 are programmed, the default sequence is 1,1 2,2 1,1,2,2 for a total of eight calls to
each number.
Level 1
Level 2
Value
State
Phone Number
Phone Number 1
123456
Phone Number 2
Account Code
Phone Number 1
BE5566
Phone Number 2
Protocol
Phone Number 1
SIA
Phone Number 2
Events
Phone Number 1 – Alarms
Enabled
Phone Number 1 – Alarm Restores
Enabled
Phone Number 1 – Tampers and Restores
Enabled
Phone Number 2 – Alarms
Phone Number 2 – Alarm Restores
Phone Number 2 – Tampers and Restores
Level 1
Level 2
Value
State
Phone Number
Phone Number 1
123456
Phone Number 2
456789
Account Code
Phone Number 1
BE5566
Phone Number 2
445566
Protocol
Phone Number 1
SIA
Phone Number 2
SIA
