66
9.3. CHECKING COOLANT LEVEL
Checking the coolant level in expansion tank
2
(Fig. 9.3) should be car
ried out only when the engine is cold.
The coolant level should be not below MIN mark and not above the clamp
upper edge.
Fig. 9.3.
Checking Coolant Level in Expansion
Tank:
1 – plug; 2 – tank
Add antifreeze mixture through the expansion tank hole covered by cap.
If the coolant level falls frequently, inspect the cooling system for leakage.
9.4. CHECKING BRAKE FLUID LEVEL IN BRAKE MASTER
CYLINDER TANK
The level of the brake fluid can be checked visually through semitranslu
cent tank
2
(Fig. 9.4) of brake master cylinder 1by the level marks on the tank
body.
Fig. 9.4.
Checking Brake Fluid
Level in Master Cylinder Tank:
1 – brake master cylinder; 2 – tank;
3 – reservoir; 4 – cap; 5 – tank cov
er with sensor
