24
Minimum engine idle speed, min
1
850
Belt sag
1)
(between alternator and
fan pulleys) under 4 da·N
(4 kgf), mm
10
Camshaft drive toothed belt ten
sion, daN (kgf)
50±5 (50±5)
Pumpandinjector unit plunger
setting travel, mm
8,04
+0,.05
(GAZ560, 5601, 5602 engines)
Pumpandinjector unit plunger
3,2
–0.04
(GAZ560, 5601)
travel up to TDC in the first cyl
3,14
–0.004
(GAZ5602)
inder, mm
For vehicles with Sofim 8140. 43C engine
Optimum fluid temperature in
cooling system,
o
C
85–95
Minimum idling speed, min
1
800±25
Clutch pedal free travel, mm
12–28
Brake pedal free travel when the
engine is not running
3–5
Total play
2)
of steering wheel in
the position corresponding to
vehicle straightforward run, deg.
Not more than 25 (20)
3)
Minimum allowable thickness of
friction layer, mm:
— front disk brake shoes
3.0
— rear drum brake linings
1.0
Minimum slope at which parking
brake must hold fully loaded ve
hicle, %
16
“GAZelle” Vehicles
Front wheel geometry:
— camber
4)
0
o
30' – 1
o
— pivot transverse inclination
4)
8
o
— caster
4)
3
o
28' ± 30' (4
o
)
5)
— toein, mm
0 – 3
Tyre inflation pressure, kPa
(kgf/cm
2
)
— front wheels
290 + 10 (3.0 + 0.1)
240 + 10 (2.5 + 0.1)
5)
1)
For reference only, nonadjustable.
2)
Total play of steering wheel for the vehicles with power steering is taken with the engine
running.
3)
For buses.
4)
The parameter is provided (for vehicle gross mass) by vehicle design and is not to be adjusted.
5)
For 4x4 types of vehicles.
