32
25. Gearbox lever.
The gearbox is equipped with safety device which pre
vents accidental engagement of reverse gear during disengagement of the fifth
gear. Engage reverse gear only after full stop of the vehicle. When reverse gear
is engaged the backing light goes on in the tail lamps.
Fig.4.10.
Changeover layout:
A – transfer case differential lock engagement
1)
(1 – disengaged, 2 – engaged );
B – transfer case
1)
gears (1 – underdrive, 2—high gear); C
2)
– transfer case gears and differential
lock engagement (1 – underdrive, 2 – high gear, 3 – underdrive and differential lock are en
gaged); D – gearbox
26. Instrument lighting control knob.
27. Accelerator pedal
.
28. Master light switch.
The switch has five fixed positions (fig. 4.11):
0 – all external lighting is OFF.
I – clearance lights, instrument cluster lighting, rear license plate lamp and
some electrical equipment controls lighting is ON.
II – additionally ON is upper or lower beam depending on the position of
turn indicator and dimmer switch lever (position I or II correspondingly).
III – additionally (position I or II) front fog
3)
lamps are ON.
IV – additionally (position III) rear fog light is ON.
Fig. 4.11.
Positions of master light switch
handle
1)
For 4x4 type of vehicles.
2)
For 4x4 type of vehicles with one transfer case gearshift lever.
3)
Mounted on some of the vehicles.
