User’s manual maps + more
- 62 -
Working with the map
Traffic: Opens the
T
RAFFIC INFORMATION
window in which pending reports are
listed (see "TMC (Traffic information)" on page 105).
Turn-by-Turn list: Shows detailed directions for the route, including all points at
which you must turn (see "Turn-by-Turn list" page 95).
9
Working with the map
9.1
Selecting the navigation map
Each country has its own navigation map. However, seamless
navigation over several countries on one continent is possible if a
continuous route can be planned on the maps saved.
Even if maps of countries in other continents are available on the
navigation device, it can only ever work with the maps of a single
continent.
►
Tap in the
N
AVIGATION
window on More functions > Settings > Map
display in order to see which maps are currently in use. Here you
can also select a different continent if the navigation device
contains any maps of countries on other continents.
9.2
Map in Standard mode
The map is always in
Standard
mode when you are not navigating,
have not calculated a route and are not searching for a destination on
the map.
Under the following circumstances the map switches automatically to
Standard
mode:
►
You begin a trip while the
N
AVIGATION
window is open. The switch
takes place after only a short while.
►
You reach the destination of a navigation in
Vehicle
mode.
To open the map:
►
In the
N
AVIGATION
window tap on Show map.
- or -
If the voice commands function is available on your navigation
device and for your language:
►
In the
N
AVIGATION
window tap on More functions > Show map.
Note:
If GPS reception is not good enough to establish your location, the
map will be opened in
destination search
mode.
