User’s manual maps + more
- 112 -
Car info
On the button at the bottom edge of the screen you can see whether
the indicated data are for the current trip (
Since start
) or for the period
since the data were last reset (
Long term
).
11.1.2
Selecting the period
In the
T
RIP COMPUTER
window tap on the
Period
button (it is labelled
with Since start or with Long term).
Select the period for which you want the data to be presented.
►
Since start: This period corresponds to the memory
1
of the
multifunction display of the combination instrument. This period will
always begin again when the ignition has been off for 2 hours or
more.
►
Long term: This period corresponds to the memory
2
of the
multifunction display of the combination instrument. It always begins
anew when one of its maxim,um values is exceeded. For details
please refer to your vehicle's operating manual.
11.1.3
Resetting the trip computer
The trip computer is reset in exactly the same way as the data of the
Think Blue. Trainer.
application are reset (see "Resetting the Think
Blue. Trainer. application" on page 118).
11.2
Status
The navigation device can show two round instruments. You can
configure which instruments are shown.
11.2.1
Opening the Status window
1. If necessary, tap on
(Main menu) to open the
S
TART
window.
2. In the
S
TART
window, tap on Car info > Status.
The
S
TATUS
window opens. Two round instruments appear.
11.2.2
Configuring the Status window
The navigation device can show the following instruments:
►
RPM gauge
►
Coolant temperature
►
Outside temperature
