User’s manual maps + more
Handsfree module
- 143 -
4. Enter a password (1-16 digits).
The navigation device prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on OK.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the
T
RUSTED
DEVICES
list.
►
If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
►
When pairing with a modern smartphone it may not be
necessary to enter a password. Instead a number will appear
on the smartphone and on the navigation device. Check
whether the two numbers are identical. Then confirm on the two
devices.
13.1.3
Connecting to a device
In this case "connection" refers to any subsequent connections between
Bluetooth devices which have already been paired. No further password
entry is necessary when connecting.
1. Make sure that Bluetooth is activated on your navigation device.
►
M make sure that Bluetooth is activated on the mobile phone and
that the Discoverable by others and Others may connect settings
are activated.
Note:
The exact designation of these settings may vary from
manufacturer to manufacturer. For details please refer to the manual
issued for your mobile phone.
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The
existing connection is disconnected automatically as soon as the
connection to a different device is initiated.
2. In the
H
ANDSFREE MODULE
window tap on
(Trusted devices).
The
T
RUSTED DEVICES
window opens. Currently connected devices
are marked with a green symbol to the right of their name. Devices
which are not connected have white symbols.
3. Please ensure that the Bluetooth connection is working properly.
►
Tap on the
(Connect) symbol in order to connect the
corresponding mobile phone as "Phone 1". The connection to a
device which is already connected as Phone 1 will be
disconnected.
