User’s manual maps + more
Before you begin
- 13 -
Note:
Create a backup of the data which exist in the internal memory of
your navigation device.
This is very easy to do with the
Fresh
software which can be
downloaded free of charge from our website
www.garmin.com/pid
.
2.4
Mounting/removing the navigation system
The vehicle is already prepared for the navigation system to be
installed. In the middle of the dashboard is a slot for the cradle of the
navigation device. Power is supplied to the device through this cradle.
Radio traffic information is received via the antenna of the car radio.
The navigation device can be used to control the car radio, and it
receives vehicle data such as consumption, amount of fuel in the tank,
speed, etc.
2.4.1
Removing the navigation device
When you receive your new vehicle, the navigation device is already
installed. To prevent theft we recommend that you do not leave the
navigation system mounted in the vehicle when you park.
Removing the navigation device from the cradle
1. Press the button at the top of the cradle (see figure).
2. Pull the bottom edge of the navigation device away from the cradle
slightly.
3. Lift the device up and out.
