G1000/GFC 700 Post Installation Checkout Procedure – Hawker / Beechcraft King Air C90
Page 3-29
190-00682-00
Revision 5
3.18
ChartView Functional Check
ChartView must be enabled using a ChartView Enable Card, as specified in 005-00375-22 “General
Arrangement Drawing, King Air C90A/GT” and a current ChartView database. Reference section 2.11
“ChartView Configuration” for enabling procedures.
NOTE
The required ChartView databases are subscription-based and are to be procured by the aircraft owner
directly from Jeppesen.
1. Select
‘
AUX – System Status’
page for display and verify ChartView database cycle number is
displayed in blue text and ChartView database is current.
2. From the Navigation Map page, press the
SHW CHRT
softkey and verify airport chart is displayed
and the following softkeys are displayed:
•
CHRT OPT
•
CHRT
•
INFO
•
DP
•
STAR
•
APR
•
WX
•
NOTAM
•
GO BACK
3. Press
CHRT OPT
softkey and verify softkeys advance to the following level of softkeys:
•
ALL
•
HEADER
•
PLAN
•
PROFILE
•
MINIMUMS
•
FIT WDTH
•
FULL SCN
•
BACK
4. Return to the
Navigation Map
Page.
5. Press the GCU
MENU
key to display the PAGE MENU. Turn the GCU large FMS knob to scroll
through the OPTIONS Menu to ‘
Show Chart’
. Press the GCU
ENT
key to display the chart and verify
airport diagram is being displayed.
6. Press
the
GCU FMS
knob to activate the cursor. Turn the GCU large FMS
Knob to select the Airport
Identifier Box.
7. Turn the GCU small and large FMS
k
nob to enter the airport identifier for New Century airport (KIXD)
then press the GCU
ENT
key to complete the airport selection.
8. Select the APR softkey. Turn the GCU large FMS
Knob to select the Approach Box then turn the
small FMS
Knob to show the approach chart selection choices.
9. Turn either GCU FMS
knob to scroll through the available charts and select a chart for viewing by
pressing the GCU
ENT
key to complete the chart selection and verify the appropriate ChartView chart
is displayed.
