Page 2-20
G1000/GFC 700 Post Installation Checkout Procedure - Hawker / Beechcraft King Air C90
Revision 5
190-00682-00
2.15
Aviation Database Loading
1. Remove power from PFD1, PFD2 and MFD.
2. Insert an SD card containing the latest cycle Jeppesen aviation database (data supplied by
Jeppesen) into the top slot of PFD2.
3. Apply power to PFD2. The following prompt is displayed in the upper left corner of PFD2:
4. Press the PFD2
ENT
key to confirm the database update.
5. A prompt will be displayed. Press ENT for YES.
6. After the update completes, PFD2 starts in normal mode. Remove the aviation database update
SD Card from PFD2.
7. Repeat steps 2 through 4 for the MFD then PFD1 (for MFD press and hold the farthest right
pushbutton).
8. The aviation databases are now updated.
9. Confirm that the correct update cycle is loaded at the power-up page of the MFD.
10. Remove the aviation database update SD Card from PFD1.
11. Continue to Section 3 for system testing and checkout.
2.16
Clearing Default User Settings
1. Remove power from PFD1, PFD2 and MFD.
2. While holding the CLR button on PFD1, re-power PFD1.
3.
When prompted to clear user settings select the
YES
softkey.
4.
Repeat steps 1 -3 for PFD 2.
5.
On the MFD, press and hold the second key from the right side of the unit (beginning on the right
side of the MFD, count 2 keys to the left). Re-power MFD.
6.
When prompted to clear user settings select the
YES
softkey.
