G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Page 4-3
190-00716-01
Revision 1
4.2.2
Required Tools
The following tools are needed to perform maintenance tasks on G1000 equipment:
•
Calibrated Milli-ohm meter, OR
•
Agilent 34410A Ammeter or equivalent
•
Fluke 187 Voltmeter or equivalent
•
Variable DC Power Supply capable of providing 1 amp current
•
#2 Non-Magnetic Phillips Screwdriver
•
3/32” Hex tool
•
Calibrated digital level (Required for AHRS ‘Procedure A’ Calibration)
•
Calibrated VHF NAV/COM/ILS ramp tester or equivalent
•
Calibrated transponder ramp tester or equivalent
•
Calibrated pitot/static ramp tester
•
Outdoor line-of-site to GPS satellite signals or GPS indoor repeater
•
Headset/microphone
•
Ground Power Unit (Capable of supplying 28 Vdc)
•
Calibrated Flight Control Cable Tension Meter or equivalent
•
Servo Gearbox Slip Clutch Adjustment Tool – Garmin P/N T10-00110-01 and a 2 Amp, 24 V,
DC Power Supply
•
Calibrated torque wrench capable of measuring 0 – 70 in/lbs
•
Standard sockets & wrenches (3/8”, 9/16”, and 13/16”)
•
Calibrated digital thermometer suitable for measuring ambient temperature
•
Laptop with RS232 emulation software
•
M22885/108T8234 extraction tool
•
An 0.060” 6-Spline wrench
•
WX-PA portable analyzer kit (If Stormscope is installed)
•
Gauging Equipment Tool SPF-4 (A1M-BCH-GE) *
* The gauging equipment tool is used for the static port inspection for RVSM
compliant aircraft only. This tool is available from Hawker Beechcraft. Any
alternate tool authorized in the Super King Air 300 or B300 Maintenance Manual for
RVSM static port measurements may be substituted for this tool. Refer to Chapter
34-10-00 of the Super King Air 300 or B300 Maintenance Manual for more details.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......
