Page 3-26
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1
190-00716-01
3.12 TAWS-A Voice Callout Option Configuration
This section applies only to installations with the TAWS-A option. This step is necessary only if TAWS-A voice
callouts (400, 300, 200, 100) have been disabled and are now desired. TAWS-A voice callouts are the default
configuration. Follow the procedures outlined in this section to load the necessary configuration files to enable
TAWS-A voice callouts.
1.
With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “
SYSTEM
UPLOAD
” page using the small FMS knob on PFD1.
2.
Activate cursor and rotate the small FMS knob to display drop down menu. Highlight
King Air - Options
and press
ENT
key on PFD1.
3.
Rotate the small FMS knob to highlight “
TAWS-A Voice Callout Installation Option
”. Press
ENT
key on
PFD1.
4.
Verify the “
TAWS-A Voice Callout Installation Option
” is displayed in the “Item” window. Press
“
LOAD
”.
Figure 3-23, TAWS-A Voice Callout Installation Configuration
5.
Monitor load progress. Verify software load completes without errors as indicated by the following:
•
Green “PASS” in Configuration column for AIRFRAME.
•
“Upload Complete………….COMPLETE” in the summary box.
6.
Press
ENT
key on PFD1 to acknowledge upload complete.
7.
Deactivate cursor.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......
