Page 3-30
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1
190-00716-01
3.16 TCAS II Traffic System Option Configuration
Follow this procedure to enable the Collins TCAS II traffic system function for the G1000 system if required. Do
not accomplish the GTX33/33D configuration procedure per Section 3.21.
NOTE
The G1000 can only be configured for TIS or TCAS II but not both.
Performing this procedure will automatically disable the TIS function.
Coordinate this configuration with Section 7.15 “Non-Garmin Traffic System
(TCAS II) Functional Check”.
1.
With the loader card in the top slot of PFD1 and PFD1 in configuration mode, select the “
System Upload
”
page on PFD1 using the small FMS knob.
2.
Activate cursor and rotate the small FMS knob to display drop down menu. Highlight
King Air - Options
and press
ENT
key on PFD1.
3.
Rotate the small FMS knob to highlight “
TCAS II System Option
”. Press
ENT
key on PFD1.
4.
Verify the “
TCAS II System Option
” is displayed in the “Item” window. Press “
LOAD
”.
Figure 3-27, TCAS II System Configuration
5.
Monitor load progress. Verify software load completes without errors as indicated by the following:
•
Green “PASS” in Configuration column for AIRFRAME, ALERTS, GIA 1, and GIA 2.
•
“Upload Complete………….COMPLETE” in the summary box.
6.
Press
ENT
key on PFD1 to acknowledge upload complete.
7.
Deactivate cursor.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......
