Page 7-26
G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air
Revision 1
190-00716-01
7.8
GDL 69A XM Data Link
Original GDL 69A is Reinstalled
No software or configuration loading is required if the removed GDL 69A is re-installed. This does not
include units that were returned for repair as their software and configuration files are deleted during the
repair testing process. Continue to the GDL 69A Test (Section 7.8.1).
New, Repaired or Exchange GDL 69A is Installed
If a new, repaired or exchange GDL 69A is installed, the correct software and configuration files must be
loaded to the unit, then the XM Satellite Radio subscription must be reactivated. See Section 3.9 and the
XM Activation Instructions listed in Table 1-2. Then continue to the GDL 69A Test (Section 7.8.1).
7.8.1
GDL 69A Test
If an XM Satellite Radio subscription has already been activated for the GDL 69A, then power up the
G1000 and go to the AUX – XM INFORMATION page and verify that the GDL 69A is working
properly. Refer to the Cockpit Reference Guide, listed in Table 1-2, for details on XM Radio weather
and music operation.
If the GDL 69A is replaced (new unit), the owner must re-activate the subscription, using the new
GDL 69A’s Radio ID number(s). Refer to the GDL 69A/69A XM Satellite Radio Activation
Instructions, listed in Table 1-3, for details on the activation process.
As a final operations check, make sure there are no MANIFEST errors shown on the PFD for the
GDL 69A.
If no other service is to be performed, continue to the return-to-service checks in Section 8.
7.9
GSA 80/9000 Servos
Original Servo(s) Reinstalled
No software loading is required if the removed servo(s) is re-installed. This does not include units that
were returned for repair as their software and configuration files are deleted during the repair testing
process. Continue to the return-to-service checks in Section 8.
New, Repaired or Exchange Servo(s) Installed
If a new, repaired or exchange servo is installed, the correct software files and certification gains must be
loaded to the unit. See Section 3.9 and then continue to the return-to-service checks in Section 8.
NOTE
Refer to the appropriate servo installation drawing listed in Table 1-2.
If no other service is to be performed, continue to the return-to-service checks in Section 8.
Summary of Contents for Cessna Caravan G1000
Page 2: ...This page intentionally left blank...
Page 89: ......
