Galvanic Applied Sciences 943-TGS-CE, Operation Manual

Page: 99 / 158

Revision 5 99 August 2021
5.3.2.3 Modicon with Floating Point Format
If Modicon 32 (Modicon with Floating Point) format is chosen as the Modbus format, the
Modbus list will contain 4 main nodes on the Modbus tree, as in Modicon 16 format.
However, the I nput Register and Output “Holding” Register nodes contain sub-nodes,
as shown in Figure 67.
Figure 67: Modicon 32 Format
These sub-nodes are the same in both the Input Register node and the Output
“Holding” Register node, and are Register Short, Register Long , and Register Float .
Thus, the input and output registers can output data in 16-bit (short), 32-bit (long), or 32-
bit with floating point (float) in the Modicon with Floating Point Modbus list. Long and Short
registers can contain whole number integer data, while Floating Point registers can
contain integer data with decimal points. The Output “Coil” Status and Input Status
nodes are identical to Modicon 16 format.
5.4 Factory Section
The Factory section in the Navigation menu consists of only a single page, the Factory
Parameters page, which is shown in Figure 68.
Figure 68: Factory Parameters Page