Galvanic Applied Sciences 943-TGS-CE, Operation Manual

Page: 91 / 158

Revision 5 91 August 2021
absorbance spectrum into concentration values. For more information on the calibration
matrix, refer to Section 5.2.2.
5.3 Configuration Section
The
Configuration
section consists of two pages that allow the user to configure many of the
analyzer’s basic operating parameters as well as the Modbus output if required.
5.3.1 Parameters Page
The Parameters page shown in Figure 60 shows a list of operational parameters that can
be viewed or edited.
Figure 60: Configuration Parameters Page
The parameters given on this page are grouped together by colours which indicate the type
of parameter they are. The colour grouping for the various parameters is given in Table 23.
Table 23: Parameters Page Colour Code
Background Colour Type of Parameter
Pink
Temperature-related parameters, including both control and
fault / warning setpoints
Blue Parameters related to the analyzer’s analytical results
Grey Calibration cycle timing and spectrometer related parameters
Green All other parameters that do not fit in any of the other groups.